FIGURE 1 shows part of a control system used to maintain the water level in a…

FIGURE 1 shows part of a control system used to maintain the water level in a

sump between the levels high and low. Two transducers (HIGH and LOW) are

used to monitor the level. The water is pumped out by two pumps, P1 and P2.

The water level in the sump is to be controlled as follows:

? If the level reaches high one pump will start to pump out.

? If the level does not reach low within about 30 seconds, the second pump

will come into action. If the level does reach low before 30 second

pumping should stop.

? If the level does not reach low within about 30 seconds of the second

pump starting, an alarm is given. The alarm is sounded until the level

reaches low. If the level does reach low before 30 seconds the pumping

should stop.

? The pumps will stop when low is detected.

? To give even loading of the pumps they are to be used alternately, e.g. if

on one pump cycle P1 starts first and P2 is the ‘back up’ then on the next

cycle P2 will start first and P1 is the ‘back up’.

Attachments:

 

"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"

What reasoning can be provided when considering advanced directives, tort, and the role on has in…

What reasoning can be provided when considering advanced directives, tort, and the role on has in healthcare while respecting the patient's right? Detail assignment is attached, the above is just a preview. Attachments: Unit-4-Questi….doc
 

"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"

Your Technical Report Final Submission should: Utilize Tebeaux and Dragga’s “Informal Report”… 1 answer below »

Your Technical Report Final Submission should:

  • Utilize Tebeaux and Dragga’s “Informal Report” formatting (pp. 182-185).
  • Cite at least 6 sources using proper APA formatting.
  • Provide a clear and strong recommendation for or against the use of the tool or technology.
  • Be at least 1,000 words.
  • Be accompanied by a properly formatted abstract that concisely summarizes your technical report and its findings in less than 125 words.

Topic: My organization is a mobile application titled “AirWaves”. My organization provides up to date flight information and and airport information.The goal of “AirWaves” is to provide passengers minute by minute updated information on their current ,and future flights, as well as weather information so the passengers can plan and travel easier than ever before. The application will also provide passengers the option to handle flight delays or cancellations right from their phones, without having to deal with long lines and stress at the customer service desk. You will have the option to choose another flight that has available seating or make hotel reservations.

 

"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"

Your answer is partially correct. Try again. Ottawa Corporation owns machinery that cost $33,160 whe

Your answer is partially correct. Try again.

Ottawa Corporation owns machinery that cost $33,160 when purchased on July 1, 2011. Depreciation has been recorded at a rate of $3,979 per year, resulting in a balance in accumulated depreciation of $13,927 at December 31, 2014. The machinery is sold on September 1, 2015, for $8,622.

Prepare journal entries to (a) update depreciation for 2015 and (b) record the sale. (Round answers to 0 decimal places, e.g. 5,275. Credit account titles are automatically indented when amount is entered. Do not indent manually. If no entry is required, select “No Entry” for the account titles and enter 0 for the amounts.)

I keep getting this wrong someone please help

 

"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"

1. Briefly describe an organization you know well and discuss how the six types of knowledge provide

1. Briefly describe an organization you know well and discuss how the six types of knowledge provided below are expressed in that organization, Select two and discuss how you have experienced them in your own life. Embrained Embodied Encultured Embedded Encoded Commodified 2. Compare and contrast tacit, explicit, and codified knowledge. Share a situation in which you used each type or believe each was used on you. Describe the experience and how you think understanding was realized by you (how you learned what you learned). 3. Evaluate the advantages and disadvantages of using formal IPR to commercialize an innovation. Determine any barriers a start-up entrepreneur is likely to experience.

 

"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"

A company records a current year depreciation charge of$1,200,000 which … A.decreases cash flow from

A company records a current year depreciation charge of$1,200,000 which … A.decreases cash flow from operations by $120,000. B.decreases net income but not the cash flow of the firm. C.increases the shareholders’ equity by $120,000. D. increases total assets by $120,000. . . .

 

"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"

The purpose of this discussion is to offer you the opportunity to debate the issue of food… 1 answer below »

Week 4 – Discussion 288 unread replies.99 replies.

Your initial discussion thread is due on Day 3 (Thursday) and you have until Day 7 (Monday) to respond to your classmates. Your grade will reflect both the quality of your initial post and the depth of your responses. Refer to the Discussion Forum Grading Rubric under the Settings icon above for guidance on how your discussion will be evaluated.

Food Justice/Food Deserts

The purpose of this discussion is to offer you the opportunity to debate the issue of food justice and food deserts. Food deserts are significant issues in poorer neighborhoods in the United States. In many of these neighborhoods, the only access to food is through local convenience stores or fast food restaurants. This severely limits the options for the poor to have access to fresh, wholesome food and has been evidenced as a key reason for the obesity epidemic in the United States. This issue is encompassed in the overarching topic of food justice, which also highlights public access to genetically modified or organic foods and the issues of equal access to positive food options in light of public health and social inequality. Prepare and post a response to the following prompt:

Read the Hilmers article, Neighborhood Disparities in Access to Healthy Foods and Their Effects on Environmental JusticePreview the document. Assume that your town is a food desert and you would like to do something about it. Prepare an argument to present to your local town council that outlines an idea to offer healthy food options to your town. Use at least one ethical theory or perspective to support the moral or ethical reasoning for why this program should be implemented.

Your initial post should be at least 250 words in length. Support your claims with examples from the required resources and/or other scholarly sources, and properly cite any references in APA style as outlined in the Ashford Writing Center (Links to an external site.). Respond to at least two of your classmates’ posts by Day 7.

 

"Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"

Discussion Question 5 Objective: Characterize the Moon. Discussion Question: How do you think the Mo

Discussion Question 5

 

Objective:
Characterize the Moon.

Discussion Question:
How do you think the Moon was formed?

 

You need to write a strong one paragraph or 2 answer, no works cited needed. Just describe in astronomy/sciene terms of how you think the moon was formed.

    • Posted: 4 years ago
    • Due: 06/03/2016
    • Budget: $3
     

    "Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"

    1. We are going to finish the Mvector class, and begin todevelop and implement the template class Ml

    1. We are going to finish the Mvector class, and begin todevelop and implement the template class Mlist developed in class.FOLLOW THE STEPS BELOW. -First add iterators to the class Mvector. Write the functionsand test them with a main program. (THE ITERFACE IS BELOW) templateclass Mvector{ public: typedef T* iterator; Mvector(); Mvector(unsigned int n); void pushback(T x); void popback(); void clear(); void insert(int i, T x); void erase(int i); T operator[] (unsigned int i); void operator– (int); int size(); iterator begin() {return v;} iterator end() {return v+vsize;} void insert(iterator ix, T x); void erase(iterator ix); private: int vsize; int vcap; T *v; void reserve(unsigned int n);}; -Next create the interface for the class along with functionstubs. (THE ITERFACE IS BELOW) #includeusing namespace std;template class Lnode{ public : T data; Lnode *lptr; Lnode *rptr;};template class Mlist{ public : Mlist(); void add(T x); void del(T x); T getfront(); private : Lnode *first; Lnode *last; int lsize;}; -Add stubs for each member function and test the compilation(c++ -c). -Write the functions and test the compilation. -Write a main program that tests the class functions. (Use thepseudo-random number generator to create a list and add and removeelements from the list. . . .

     

    "Looking for a Similar Assignment? Get Expert Help at an Amazing Discount!"